background image

Cleaning the blower unit 

The following chemicals have been tested and approved as cleaning agents 
for the blower unit. 
• Process NPD (1.256) from Steris  
• Spor-Klenz (undiluted) from Steris  
• Clorox liquid bleach at 10% concentration  
• Sani-cloth HB wipes  
• 100% Methanol  
• 70% IPA  

Using the Decontamination Kit  

The Decontamination Kit provides the option to further clean the blower unit 
with running water, immersed up to 12-in (30.5 cm).  

1.  Place the white pad inside of 

the EVA or EVAHL blower unit 
as shown.

2.  Place the Intake Cover Plug 

– seating it on the bottom 
flange and aligned to the left 
of the notch on the blower 
(verify that the intake plug 
gasket is free of debris). 

3.  Secure the plug (EVAICP67) 

by rotating plug q/8th of a 
turn clockwise until the lock 
tab is secured over notch on 
the blower to the LOCKED 
POSITION as shown. 

4.  Place the Port Plug (PA3PG) 

into the breathing tube 
outlet opening and secure by 
rotating the plug clockwise 
(verify that the Port Plug 
Gasket is installed). 

5.  Clean the EVA/EVAHL as 

directed. 

6.  After cleaning remove the Port 

Plug and Intake Cover Plug. 
Wipe away any intermittent 
water that may have dripped 
inside the blower unit housing 
upon removing the filter inlet 
plug. 

        

NOTE:

  

          The white pad can be used, 

if required.

  

 

NOTE:

 

 The plug gaskets should be inspected for damage and wear prior to 
each use. The decontamination kit should be replaced every 100 uses to 
minimize the use of worn components. Worn or damaged gaskets must 
be replaced. Exposing the EVA or EVAHL blower unit to water while 
using damaged gaskets may cause damage to the blower unit and void 
the warranty. Blower units that have been dropped or damaged should 
not be immersed due to potential water ingress. 

©2020 Bullard. All rights reserved.

60810012089B (0920)

ISO 9001 

certified

www.bullard.com

Bullard Center

2421 Fortune Drive
Lexington, KY 40509 • USA
877-BULLARD (285-5273)
Tel: +1-859-234-6616
Fax: +1-859-246-0243

Americas Operations

1898 Safety Way
Cynthiana, KY 41031 • USA
877-BULLARD (285-5273)
Tel: +1-859-234-6616
Fax: +1-859-234-8987

Bullard GmbH

Dieselstrasse 8a
53424 Remagen • Germany
Tel: +49-2642 999980
Fax: +49-2642 9999829

Bullard Asia Pacific Pte. Ltd.

51 Changi Business Park Central 2
#03-04 The Signature
Singapore 486066
Tel: +65 6745 0556
Fax: +65 6797 0299

Notch

Notch

UNLOCKED POSITION

LOCKED POSITION

Reviews: