Supplying Grade “D” or Higher Air Quality
Helmet Shell
➀
Cape
➁
Flow Control
Device
Air Supply Hose
➄
Suspension
Inner and Outer
Window Lenses
➤
Figure 1
Breathing
Tube
Component
Concept
10
Component Concept
The Bullard GenVX Series airline respirators consist
of five components (Figure 1): Helmet shell, breathing
tube assembly, flow control device, cape, and air supply
hose.
All components must be present and properly
assembled to constitute a complete NIOSH
approved respirator.
Air supply hose is not included with
respirator assembly purchase and must be
purchased separately. Bullard air supply hose
must be used in order to maintain respirator
assembly compliance.
Failure to use complete NIOSH approved Bullard
components and replacement parts voids approval of
entire assembly. Basic parts are listed on the NIOSH
Approval Label on pages 2-9. Failure to follow these
instructions could result in death or serious injury.
WARNING
➂
➃
The Bullard GenVX Series airline respirators consist of
five components:
1. Helmet shell
2. Cape –
Choice of 1, included with respirator purchse
a. 28V
b. 38VX
c. GGVX
d. PKVK
e. PKXLVX
3. Breathing tube assembly –
Included with respirator purchase
a. GVBT
4. Flow control device –
Choice of 1, included with respirator purchase
a. F30
b. F35
c. F40
d. CT Series
e. AC1000 Series
f. HCT Series
g. HC2400 Series
h. Frigitron2000
5. Air Supply Hose –
NOT INCLUDED WITH RESPIRATOR PURCHASE. MUST BE
PURCHASED SEPARATELY.
a. 4696
b. 469650
c. 4696100
d. 5454
e. 5457
f. 5458