4
21
SYSTEM FEATURES
Two-Button
Remotely start your car to run the heater or air
Extended Range
conditioning from an extended distance.
Remote Control
Two-Way Capability Works with your factory keyless remote transmitter
or the transmitter included with this kit.
Parking Light
Confirms that your vehicle has received a remote
Confirmation
signal and will remain on if the engine is remotely
started. (Optional part #775 required.)
Code Learning
Allows your remote starter to learn new remotes, should
you want to add remotes, or if remotes are lost.
Pre Programmed
Unit is programmed to run for 15 minutes or stop at
Run Time
any time with the remote, by pressing the brake or
by opening the hood.
Pit Stop Mode
Allows you to exit the vehicle while the engine
remains running.
Tach/Tachless
A programmable feature that lets you decide to choose
Option
the easy to install tachless operation or the wire-
in, tach operation.
Limited Lifetime Guarantees life-long protection.
Warranty
Your system includes:
1- Main Control Module
with On-board Relay
1- Two Button Remote Transmitter
1- 9-Pin Wire Harness
1-Hood Pin Switch
1-Warning Sticker for Under the Hood
6-Heavy Gauge Wires
SYSTEM COMPONENTS
REQUIRED TOOLS
Unless your remote starter includes a Bonus Installation Kit
you will need the following items: a sharp knife, electrical
tape and a computer-friendly test light. A 5/16 inch drill
bit may be needed to install the hood pin switch. If the
bottom of your dash on the driver’s side will come off, you
must remove it. If this is the case a screwdriver or a wrench
may be needed,
1-Warranty
1-Installation &
Operation Guide
1-Bonus Installation Kit
•Installation Video
•Computer-friendly Test Light
•Electrical Tape
•Wire Ties
•Razor Knife
TECHNICAL ASSISTANCE
Should you need help. First check our website at
www.bulldogsecurity.com or call our toll-free Tech Support
Hotline Monday through Friday 9AM-8PM and Saturday 10AM-4PM
EST at 800-878-8007.
You must give the following information:
• Name
• Telephone Number with Area Code (Fax number if applicable)
ATTENTION:
We urge you to immediately place this card in your wallet.
OPERATING INSTRUCTIONS
Start (with RS82I remote) Press and release button #1 the
vehicle will remote start.Start (with factory keyless entry
remote) Press and release the lock button on the remote 3
times, the vehicle will remote start. Stop (with RS82I
remote) Press and release button #2 the vehicle’s remote
starter will shut down. Stop (with factory keyless remote)
Press and release the lock button on the remote, the remote
starter will shut down. Pit Stop: Exiting the Car with the
Engine Running (with RS82I remote) Make sure the transmission
is in park, press and release button #1 (start) before
turning the ignition switch off. (The engine will remain
running for 15 minutes.) Pit stop: (with factory keyless
entry remote) Press and release the lock button on the
remote 3 times before turning the ignition switch off. (The
engine will remain running for 15 minutes.)
1-800-878-8007
www.bulldogsecurity.com
email: techsupp@bulldogsecurity.com
MADE IN AMERICA, GUARANTEED FOREVER
OPERATING FUNCTIONS
FOR YOUR WALLET OR GLOVE BOX
