10
WARRANTY
30 day satisfaction guarantee
Bullet Tools
™
is confident that you will be absolutely pleased
with the purchase of our product. If, for any reason, you are
not completely satisfied with your tool, we will refund your
purchase price at any time within 30 days of your original
purchase (receipt required). If you want to return your
product under our 30-day no risk trial offer (valid only for
purchases made in the US), please contact us at 208-772-
0175 for return instructions.
BUlletPrOOf warranty gOld (5 year)
Bullet Tools warrants only to the original purchaser of
this product, when purchased from an authorized North
American reseller or distributor, that this product will be free
from defects in material and workmanship under normal
use and service for five (5) years from initial purchase. This
warranty includes all parts except the blade and cosmetic
appearance (chips, dings, scratches) caused by normal use
and wear. This warranty does not cover any damage due
to accident, misuse, abuse or negligence. Further, it is valid
only if the product is used with the cut products specified
in the cut guide. Please refer to the User Guide for details or
call Bullet Tools technical support. In order to recover under
this limited warranty, the purchaser must make claim to
Bullet Tools within 60 days of occurrence and must present
acceptable proof of original ownership (such as original
receipt, warranty card registration, on-line registration,
or other documentation Bullet Tools deems acceptable)
for the product. Bullet Tools, at its option, shall repair or
replace the defective unit covered by this warranty.
Bullet Tools disclaims all warranties, express or implied,
including all warranties of merchantability and/or fitness
for a particular purpose. Additional rights may be available
under the laws of your state or province. Any and all
warranties, written or implied, are void with any alterations
to the product. Note: Bullet Tools shall not be liable for any
special, incidental or consequential damages, including
but not limited to lost revenue, lost profits, rental or
replacement equipment, downtime, damage to property
and third-party claims, arising out of any theory of recovery,
including warranty, contract, statutory or tort.
Your Magnum
™
Siding Shear cuts a wide variety of
products. Please refer to this cut guide for
recommended products and thicknesses.
Please note:
Approved materials may vary
in density and hardness. If extreme pressure
is required to cut a product, it may result in
damage to your machine. Please contact Bullet
Tools
™
before proceeding. Warranty is void if an
unapproved product damages the machine.
Magnum siding shear
cut guiDe
Maximum Thickness = 25mm or 1”
Material
siding, Fiber cement board
siding, pressboard lap
siding, Vinyl
siding, Wood
trim, osb
trim, Fiber cement
trim, Vinyl
shingles, tar or Wood
Commercial Vinyl
Luxury Vinyl Tile
Parquet
Laminate Flooring
PVC Tile
Rubber Cove Base
Rubber Tile
Soft Plastic
To obtain warranty service,
contact Bullet Tools
at 1-208-772-0175, or go to
www.BulletTools.com/support/warranty-claim/
for pre-authorization and further instructions.