3
1. Power Assembly
2. Handle Assembly
3. Fences (2)
4. Table
5. Tail
6. Rails (2)
7. Hone Stone
8. Angle Bracket
9. Mount Bracket
10.
Hardware Kit
Item A. (4) 8mm x 60mm PH Phillips Machine Screws
Item B. (4) M8 Star Washers
Item C. (4) 8mm x 25mm PH Phillips Machine Screws
Item D. (6) 6mm x 16mm PH PHillips Machine Screws
Item E. (5) #10 x 1 PH Phillips Self Tapping Screws
Item F. (1) M16 x 50 BHCS
(Pre-Installed in Cam)
Item G. (1) 10mm Hex Wrench
(Not Shown)
set up
asseMbly
1. attach rails
Attach rails to base using
Item A
machine screws
fitted with star washers,
Item B
. Do not tighten
screws until after step 3.
Please Review and Verify Parts Included in Box:
Hardware Kit
*
:
A
E
F
D
C
B
2
3
4
8
5
6
9
A
B
1
7
2. attach tail
Attach tail and angle bracket(s) to rails using
Item C
machine screws. Make sure holes in tail are
facing up.
Do not tighten screws until after step 3.
1
2
*The Hardware Kit is used in
multiple models. Your Shear may
not use all of the items listed.
START ALL SCREWS BY HAND TO AVOID CROSS-THREADING
620
626