5
、
Preheating Setting (if required)
：
The display will show clearly whether preheating work or not. See following Fig 7-8
：
：
ON
OFF
Fig.7
：
Pre-heating On
图
8
：
Pre-heating Off
Pre- heating setting should be under the power off status. just turn on the spa ,
LCD will display “---”
1
） 、
Press“
” to start Pre-heating setting mode, LCD flashes of “ON” , You can set the pre-heating time
simultaneously (refer to chart and illustration 3).
Press“
”to turn off the pre-heating ,and the “
” will disappear on panel.
2)
、
Press“
”
（
minutes
）
and“
”
（
hours
）
to adjust the time.
It will be added 1 hour when pressing
“
HOUR
” each time and hours could be added continually when
pressing the
“
HOUR
” without stopping. The adjustment of hours is 00-23
It will be added 1 minute when pressing
“
MIN
” each time and minutes could be added continually
when pressing the
“
MIN
” without stopping. The adjustment range is 00~59
3)
、
Press“
” to set lasting time of circulation.
It will be added minutes by pressing
“
” and 1 hour by pressing“
”each time
。
The maximum
working time is 19 hours and 55 minutes.
4)
、
Press
“
” again to set the water temperature(please refer to
Chart 3
and illustrate 4). Press
“
”
button to change the temperature. The range of temperature setting is:
15~40
℃
。
5)
、
Press “
” to confirm all settings.
6
Summary of Contents for SPA-562
Page 1: ...HOT TUB Model SPA 562 OPERATING INSTRUCTION 1...
Page 13: ...13...
Page 14: ...14...
Page 15: ...15...
