background image

 

 I 

Warranty Manual 

 

I.

 

Warranty period: one year. 

 
II.

 

Within one year since the purchase date, any fault occurred under normal working condition 

can be maintained with the invoice or receipt issued by the distributor. 
 
III.

 

Within warranty period, the maintenance of following conditions will be charged: 

1.

 

The damage of the machine caused by natural disasters including but not limited to thunder 

and lightning, fire, flood and earthquake. 
2.

 

The damage caused by negligence, deliberate destruction or arbitrary modification. 

3.

 

The damage of the machine caused by incorrect usage, movement or fall-off. 

4.

 

The  damage  caused  by  disassembly,  maintenance,  modification  or  additional  product,  which 

are implemented by the people without authorization of our company. 
5.

 

Without receipt or warranty card even in the warranty period. 

6.

 

The model number on warranty card is different from that of the machine to be repaired. 

 

IV.

 

Precautions: 

1.

 

Rubber or plastic parts are wearing parts, which are not under warranty. 

2.

 

Please keep this warranty card properly. It will be not replaceable in case of loss. 

3.

 

Please  fill in  the receipt  card carefully  and send the  receipt  card together  with the  purchase 

receipt (copy) to our company. If the receipt card and the purchase receipt are not sent back, our 
company has the right not to make warranty commitments of the machine. 
 
For your interest, please fill in the receipt card carefully and send it back in time. 
 

Summary of Contents for WNJ380









Reviews: