Manual-HotAir-3000-en
Page 2 / 15
Prospect
The HotAir3000 is a stylish, practical reflow oven for manufacturing
and reworking of SMT products. The oven has a large display. The
intuitive menu navigation is controlled by a membrane keyboard.
The product uses highly efficient infrared heating elements and has
several thermocouple temperature gauges. Due to this and the pre-
cise evaluation in the microprocessor, the temperature curve of the
reflow process is highly accurate and the temperature in the respect-
ive reflow sections very uniform.
With the HotAir3000 all common alloys can be processed. The oven
has an automatic error detection with alarm.
This product has a variety of applications such as reflow soldering,
repairing, drying and so on. It is suitable for SMT small series, for re-
search and development of electronic products, school, education and study. The operating system soft -
ware is in English.
The stove is well insulated by a special aluminum silicate cotton, which reduces energy consumption, pro-
tects the circuit and allows optimal operation and keeps the temperature in the furnace constant.
Technical Data
Power connection
200 – 230 VAC. / 50-60Hz
Max. Power Consumption
2400 W
Max. PCB-Board Size
350 x 300 mm
Time Settings
00:00 – 99:59 sec.
Temperature
60 -300 °C
Setting Options
5 Phases adjustable in time and temperature:
Preheat
Heat
Soldering
Holding
Cool down
Working Modi
AutomaticReflow-Soldering
Permanent Heating or Drying function
Option to store 4 different Reflow profiles
Interface
Grafic display with Keyboard
automatic Alarm function
Display of Process progress
Heatup Time
ca. 8 min
Dimensions (LxWxH) (mm)
504 x 500 x 314 mm
Weight
+/- 28 kg
Technical Changes reserved
Bungard Elektronik GmbH & Co. KG, Rilkestraße 1, 51570 Windeck – Germany
Tel.: +49 (0) 2292/9 28 28 - 0, Fax: +49 (0) 2292/9 28 28 - 29, E-mail: support@bungard.de
