Bungard RDC 30 Translation Of The Original Instructions Download | Manualshive

Page: 3 / 13

background image

rdc-30-manual-en

Page 3 /

EG- Declaration of Conformity

EG-Konformitätserklärung/Declaration of Conformity

Hersteller / Supplier:

Bungard Elektronik GmbH & Co. KG
Rilkestraße 1
51570 Windeck Germany

Bevollmächtigte Person für die Zusammenstellung

der technischen Unterlagen:
Person in charge

Jürgen Bungard, Geschäftsführer /general director
Rilkestraße 1
51570 Windeck Germany

Product:

Tauchbeschichter RDC21-k
Dip Coater RDC21-k

Hiermit erklären wir, dass die oben beschriebenen Maschinen allen einschlägigen Bestimmungen der Maschinen-

richtlinie 2006/42/EG entspricht.
Die oben genannte Maschine erfüllt die Anforderungen der nachfolgend genannten Richtlinien und Normen:
We hereby declare that the machines described above complies with all relevant provisions of the Machinery Direct -

ive 2006/42/EC.

The above machine meets the requirements of the following guidelines and standards:



Maschinenrichtlinie 2006/42/EG / Machinery Directive 2006/42/EC



EMV-Richtlinie 2014/30/EG / EMC Directive 2014/10830EC



Niederspannungsrichtlinie 2014/35/EG / Low Voltage Directive 2014/35/EC



DIN EN 60204-1

Sicherheit von Maschinen - Elektrische Ausrüstung von Maschinen - Teil 1: Allgemeine Anforder-

ungen / Safety of machinery - Electrical equipment of machines - Part 1: General requirements



DIN EN ISO 14121-1

Sicherheit von Maschinen - Risikobeurteilung - Teil 1: Leitsätze / Safety of machinery - Risk

assessment - Part 1: Principles



DIN EN ISO 12100-1

Sicherheit von Maschinen - Allgemeine Gestaltungsleitsätze, Risikobeurteilung und Risikomin-

derung / Safety of machinery - Basic concepts, risk assessment and risk reduction



DIN EN 55014-1 2012-05

Elektromagnetische Verträglichkeit, Anforderungen an Haushaltsgeräte, Elektrow-

erkzeuge und ähnliche Elektrogeräte, Teil 1: Störaussendung / Electromagnetic compatibility Requirements for

household appliances, electric tools and similar electrical appliances Part 1: Emission



DIN EN 55014-2-2009-06

Elektromagnetische Verträglichkeit - Anforderungen an Haushaltgeräte, Elektro-

werkzeuge und ähnliche Geräte - Teil 2: Störfestigkeit - / Electromagnetic compatibility - Requirements for house-

hold appliances, electric tools and similar apparatus - Part 2: Immunity



Niederspannungsrichtlinie / Low Voltage Directive 2014/35/EG



Maschinenrichtlinie / Machinery Directive 2006/42/EG/37/EG

Windeck, 10.1.2020

Jürgen Bungard Geschäftsführer

Bungard Elektronik GmbH & Co. KG, Rilkestraße 1, 51570 Windeck – Germany

Tel.: +49 (0) 2292/9 28 28 - 0, Fax: +49 (0) 2292/9 28 28 - 29, E-mail: support@bungard.de

«
1
2
3
4
5
...
»

Summary of Contents for RDC 30














Reviews:

No comments

Related manuals for RDC 30

Brand: ABB Pages: 27

Brand: KaVo Pages: 13

Brand: vc999 Pages: 52

Brand: Mandam Pages: 9

Brand: Gaspardo Pages: 16

Brand: Gastrodomus Pages: 4

Brand: HANYOUNG NUX Pages: 2

Brand: Gastrodomus Pages: 39

Brand: H&S Pages: 42

Brand: Wasp Pages: 50

Brand: Zimmer Pages: 2

Brand: ZipRip Pages: 31

QUICK-ALIGN Vari-Flex

Brand: Össur Pages: 36

Brand: Össur Pages: 2

Brand: Össur Pages: 8

Brand: Agilent Technologies Pages: 114

LUNAQUA Classic LED

Brand: Oase Pages: 16

Brand: ABB Pages: 106

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands