background image

Manual-SMT 3000 ECO LIGHT Plus-en

page 1 / 18

Manual Pick&Place-Manipulator
SMT3000 ECO LIGHT Plus 

Translation of the Original Instructions

Table of Content

 Prospect.....................................................2
 Technical Data............................................3
 Declaration of Conformity...........................4
 Introduction.................................................5
 General.......................................................5
 Intended Use..............................................6
 Safety.........................................................7
 Installation..................................................9
 Function description..................................11

 Optional dispensing device.......................14
 Camera attachment..................................15
 Amendment Monitor.................................16
 Customer service......................................17
 Guarantee.................................................17
 Disclaimer of warranty..............................17
 Disclaimer of warranty..............................17
 Copyright..................................................18
 Copyright..................................................18

Bungard Elektronik GmbH & Co. KG, Rilkestraße 1, 51570 Windeck – Germany

Tel.: +49 (0) 2292/9 28 28 - 0, Fax: +49 (0) 2292/9 28 28 - 29, E-mail: support@bungard.de

Summary of Contents for SMT3000 ECO LIGHT Plus



















Reviews: