5
Instruction manual
© 22.02.2017 Bungard GmbH & Co. KG
2
General
Before installation, connection to the mains or starting this equipment please read all of
these instructions.
These instructions should always be available to operators, as they are necessary for the
safe operation of this equipment and because they can assist in diagnosing any problems
that might occur.
This manual contains informations of the stencil printer and is the translated English
version.
For use by the user and associated personnel.
Copying and distribution is permitted only for internal company use.
2.1
Intended use
The stencil printer is constructed for the following intended use:
the manual application of solder paste on PCBs
Only in the manual described utilization is allowed.
The BUNGARD GmbH & Co. KG assumes no liability for damages made by not correct
use of the machine.