Page 2
For technical questions, please call 1-800-444-3353.
Item 69643
table of Contents
Safety ......................................................... 2
Specifications ............................................. 4
Setup .......................................................... 4
Operation .................................................... 6
Maintenance ............................................... 9
Parts List and Diagram .............................. 10
Warranty .................................................... 12
WaRninG SYmBOlS anD DeFinitiOnS
This is the safety alert symbol. It is used to alert you to potential personal injury hazards.
Obey all safety messages that follow this symbol to avoid possible injury or death.
Indicates a hazardous situation which, if not avoided,
will result in death or serious injury.
Indicates a hazardous situation which, if not avoided,
could result in death or serious injury.
Indicates a hazardous situation which, if not avoided,
could result in minor or moderate injury.
Addresses practices not related to personal injury.
impORtant SaFetY inFORmatiOn
Read all safety warnings and instructions.
Failure to follow the warnings and instructions may result in electric shock, fire and/or serious injury.
Save all warnings and instructions for future reference.
1.
Keep installation area clean. Cluttered
areas invite accidents.
2.
Observe installation area conditions.
Keep
work area well lit during installation.
3.
Check for damaged parts.
Before using
any product, any part that appears damaged
should be carefully checked to determine that
it will operate properly and perform its intended
function. Check for any broken or damaged
parts and any other conditions that may affect its
operation. Replace or repair damaged or worn
parts immediately. Do not use the Security Light
if any switch does not turn on and off properly.
4.
Replacement parts and accessories.
When
servicing, use only identical replacement parts.
Use of any other parts will void the warranty.
5.
Check hardware and assembled parts
after assembling.
All connections should
be tight and hardware tightened.
6.
Keep children away.
Mount the Light, Solar
Panel, and Cord out of children’s reach.
Sa
Fet
Y
Ope
R
ati
O
n
m
aintenan
C
e
Setup
