BUNN
Espress
®
ES•J
5
OPERATION - ADJUSTMENT
AUTOMATIC GRINDING
Place the rotary OFF/ON/START switch in the ON position. Grinding will begin after the
doser lever is actuated twelve times and will cease when the ground coffee container is filled to a
predetermined level. Placing the switch in the OFF position stops the grinder.
MANUAL GRINDING
Momentarily place the rotary OFF/ON/START switch in the START position. Grinding will
begin immediately and will cease when the ground coffee container is filled to a predetermined
level. Placing the switch in the OFF position stops the grinder.
NOTE – The motor must not be used more than 30 minutes per hour.
DISPENSING
Pull the doser lever until it stops and release it. The ground coffee container must be full
to a level above the star partitions in order to accurately and consistently dispense full doses with
each pull of the lever.
GRIND ADJUSTMENT
Adjustments to the grind must always be made with the hopper emptied and the motor
running. Turn the adjustment disc beneath the hopper to change the grind. The disc will remain
where set until further adjustments are made.
Turn the disc clockwise for a coarser grind.
Turn the disc counterclockwise for a finer grind.
DOSAGE ADJUSTMENT
Adjustments to the dosage must always be made with the ground coffee container filled
to a level above the star partitions to accurately and consistently dispense full doses with each
pull of the lever. Turn the adjustment knob in the center of the container to change the dose.
Turn the knob clockwise to reduce the amount of coffee in each dose.
Turn the knob counterclockwise to increase the amount of coffee in each dose.
CLEANING
The use of a damp cloth rinsed in any mild, nonabrasive, liquid detergent is recommended
for cleaning all surfaces on the grinder. Care should be taken not to scratch the plastic parts with
any abrasive materials.
