Page 27
PROGRAMMING FUNCTIONS - LEVEL 2 (cont.)
PROGRAMMING THE BREWER (cont.)
* SET RECIPE TEMPS
(ITCB only)
This function allows the operator to set separate tem-
peratures for each selected recipe.
NOTE: Setting recipe temps will override the MASTER
TEMP. The tank will hold at the lowest temperature
between the three selected recipes stored in the brew
buttons. For instance, let’s say Brew A’s recipe tem-
perature is set at 205°, Brew B’s recipe temperature is
set at 205°, and Brew C’s recipe temperature is set at
200°. The tank will hold at 200°. If Brew A or Brew B
is pressed, the tank will heat to the 205° temperature.
The brew button must be pressed again in order for
a brew to start. After the completion of that brew, the
tank will return to the 200° holding temperature. It
may take awhile for the tank to return to the lower
temperature.
1. Press and hold the right hidden switch until the
display reads SET LANGUAGE. Press and release
the right hidden switch until the display reads SET
RECIPE TEMPS.
2. To set different temperatures for different recipes,
press and release YES. Pressing NO will advance
to the next programming function, SERVICE
TOOLS.
3. The display should read WILL OVERRIDE THE
MASTER TEMP, and then OVERRIDE? To retain the
MASTER TEMP setting, press and release NO. To
set separate recipe temperatures, press and release
YES.
4. The display should read TEA 1. Using (-) and (+),
adjust the temperature for TEA 1. When finished,
press and release DONE.
5. The screen should now read TEA 2. Use (-) and (+)
to adjust the temperature for TEA 2. When finished,
press and release DONE.
6. Repeat for all standard and stored recipes.
7. After the last temperature has been entered, press
DONE. The screen should now read TANK WILL
HOLD AT LOWEST TEMP, and then advance to the
ENTER ASSET # screen. To exit programming and
return to the MAIN SCREEN, press ENABLE BREW
ON/OFF switch.
NOTE: To return to using the MASTER TEMP setting
after RECIPE TEMPS have been used, press and hold
the right hidden switch until the display reads SET
LANGUAGE. Press and release the right hidden switch
until the display reads SET RECIPE TEMPS. Select YES.
The display will read WILL OVERRIDE THE MASTER
TEMP, and then OVERRIDE? To return to using the
MASTER TEMP, select NO. To exit programming and
return to the MAIN SCREEN, press ENABLE BREW ON/
OFF switch.
WILL OVERRIDE
THE MASTER TEMP
SET RECIPE TEMPS
NO YES
OVERRIDE?
NO YES
TEA 1 XXX
°
(-) DONE (+)
ENTER ASSET #?
NO YES
PRESSING NO WILL
ADVANCE TO
ENTER ASSET #
TANK WILL HOLD
AT LOWEST TEMP
TEA 2 XXX
°
(-) DONE (+)
COFFEE XXX
°
(-) DONE (+)
PRESSING NO
WILL
RETAIN THE
MASTER TEMP
41581.2 091609
