Bunn LCR-2 Installation And Operating Manual Download

Page: 15 / 36

MENU SCREEN

ACTION

DESCRIPTION

LOCK FLAVOR ?

EXIT YES

FLAVORS LOCKED

EXIT

Select (YES) or (EXIT)

NONE

Select YES, to Lock In sensor calibration. NOTE:

Display will return to “Find LF Target” if sensor

calibration is out of range.

Confirms that sensor calibration was in range and

accepted. Scroll down to continue.

36026 120105

Use the (+) or (-) buttons to

adjust the volume

Use the (+) or (-) buttons to

adjust the volume

Set the volume to be dispensed during a Left

Portion controlled dispense to:

[0 - 640 Oz.] or [0 - 18.93L]

Set the volume to be dispensed during a Right

Portion controlled dispense to:

[0 - 640 Oz.] or [0 - 18.93L]

LF DISP VOLUME

(-) 4.0oz (+)

RT DISP VOLUME

(-) 4.0oz (+)

Portion Control Settings for Pull & Hold Dispensers

For Portion Control Dispensers (LCR-2 PC, LCR-2C PC, and LCR-2A PC) go to Full Time Portion Control Settings

LF DISP VOLUME 1

(-) 4.0oz (+)

LF DISP VOLUME 2

(-) 0.0oz (+)

RT DISP VOLUME 1

(-) 4.0oz (+)

RT DISP VOLUME 2

(-) 0.0oz (+)

WATER DISP VOL 1

(-) 0.0oz (+)

WATER DISP VOL 2

(-) 0.0oz (+)

Use the (+) or (-) buttons

to adjust the Normal Left

volume

Use the (+) or (-) buttons

to adjust the Alternate Left

volume

Use the (+) or (-) buttons

to adjust the Normal Right

volume

Use the (+) or (-) buttons to

adjust the Alternate Right

volume

Use the (+) or (-) buttons to

adjust the Normal Hot Water

volume

Use the (+) or (-) buttons to

adjust the Alternate Hot Water

volume

Set the desired portion control volume to be

dispensed during a Normal Left dispense to:

[0 - 640 Oz.] or [0 - 18.93L]

Set the desired portion control volume to be

dispensed during a Alternate Left dispense to:

[0 - 640 Oz.] or [0 - 18.93L]

Set the desired portion control volume to be

dispensed during a Normal Right dispense to:

[0 - 640 Oz.] or [0 - 18.93L]

Set the desired portion control volume to be

dispensed during a Alternate Right dispense to:

[0 - 640 Oz.] or [0 - 18.93L]

Set the desired portion control volume to

be dispensed during a Normal Hot Water

dispense:

[0 - 640 Oz.] or [0 - 18.93L]

Set the desired portion control volume to

be dispensed during a Alternate Hot Water

dispense:

[0 - 640 Oz.] or [0 - 18.93L]

Full Time Portion Control Settings

Summary of Contents for LCR-2





































Search results

Summary of Contents for LCR-2

Reviews:

Related manuals for LCR-2

Brands by name

Popular brands

Bunn LCR-2, Installation And Operating Manual

Search results

Summary of Contents for LCR-2

Reviews:

Related manuals for LCR-2

Brands by name

Popular brands