Bunn My Cafe MCO Installation & Operating Manual Download

Page: 14 / 17

Page 14

MAIN SWITCH

Diagnostics

Calibrate

Import/Export

Settings

Factory Defaults

PROGRAMMING

2. Remove 4 screws and the top cover.

To Import drink/machine settings:

1. Turn off the power switch.

49251.0 081415

Page 17

Page 15

SERVICE TOOLS:

IMPORT/EXPORT

1. Carefully insert USB flash drive into socket. NOTE:

Make sure no other files are stored on drive other

than what you are updating.

2. Turn on power switch. Go to Import/Export screen.

Press "Import". Allow files to finish loading.

3. Turn off the power switch.

4. Remove USB drive.

5. Re-install 4 screws and the top cover.

6. Turn on power switch.

To export machine settings:

1. Follow same procedures as above, except press "Ex-

port" to copy drink/machine settings to the flash drive.

Summary of Contents for My Cafe MCO


















Search results

Summary of Contents for My Cafe MCO

Reviews:

Related manuals for My Cafe MCO

Brands by name

Popular brands

Bunn My Cafe MCO, Installation & Operating Manual

Search results

Summary of Contents for My Cafe MCO

Reviews:

Related manuals for My Cafe MCO

Brands by name

Popular brands