Page 6
Water volumes and fl ow settings have been preset at the factory. Refer to "ADJUSTMENTS" section of this manual
for the "SET BREW VOLUMES", should the volume need to be increased or decreased.
The brewer is now ready for use in accordance with the instructions for Coffee Brewing.
INITIAL SET-UP
49063.2 032014
POUROVERS ONLY:
REMOVE TOP COVER
Pour in water to the max fi ll line.
PRESS LARGE BREW BUTTON
Water will fl ow into the cup.
When fi nished, discard contents
of cup.
OPEN & CLOSE CHAMBER
Pull bottom or push top of
handle to open. When heated
(green light), open, then close
brew chamber.
PLACE CUP
Place a large empty cup (10
oz. or more) under the brew
chamber.
CONNECT TO POWER SOURCE
Turn on main power switch. Water
will fl ow from reservoir to fi ll the
internal tank. Wait approximately
ten minutes for the water to heat.
The "READY" indicator will remain
"red" until tank reaches it's operating
temperature, then turn green.
