Page 17
29877 080301
REVIEW RECIPES/MODIFY RECIPES/SET UP NO
NAME COFFEE FLAVORS:
This function has three parts. It allows the opera-
tor to view the brew settings for the various coffee
names programmed into the brewer.
It also allows the operator to modify (change) any
of the
BREW VOLUMES, BYPASS PERCENTAGES,
PULSE BREW TIMES, PRE-INFUSION TIMES
and
DRIP-OUT TIMES
for a particular coffee name pro-
grammed into the brewer.
Finally, this function is used to set up the two
NO
NAME
coffee
BREW VOLUMES, BYPASS PERCENT-
AGES, PULSE BREW TIMES, PRE-INFUSION TIMES
and
DRIP-OUT TIMES.
Procedure for reviewing recipes:
1. Press and hold the ® pad until the display reads
SET NEW RECIPES
. Release the ®. Press the ®
until the display reads
REVIEW RECIPES
.
PROGRAMMING FUNCTIONS - LEVEL 2 (cont.)
P2360
2. Press
YES
to proceed. The display should now
read
NO-NAME LEFT,
along with
MODIFY, SHOW
and
NEXT.
3. Press and release
SHOW.
The screen will scroll
through all the brew settings for that particular
coffee flavor name. When finished, the display
will return to the coffee name just viewed.
4. To see settings again, press
SHOW.
To advance
to the next coffee flavor name, press
NEXT.
5. To exit, press
NEXT
until the display reads
THAT
WAS THE LAST RECIPE.
6. After 5 seconds, the display will return to the
REVIEW RECIPES
screen. Press and release
NO
to advance to the next function screen, or press
and release either of the
pads located on the
front switch panel to exit the programming mode
and return to the
MAIN SCREEN.
