© 2018 BURCAM Printed in Canada 506516
INSTALLATION
INSTRUCTIONS
Please read these
instructions carefully.
Failure
to comply
to instructions
and
designed
operation of
this system,
may
void
the
warranty.
Your pump has been carefully packaged at
the factory to prevent damage during shipping.
However, occasional damage may occur due
to rough handling.
Carefully inspect your pump
for damages that could cause failures. Report any
damage to your carrier or your point of
purchase.
MODEL
506518SS
AND BY-PRODUCTS LIKE
506547SS
506548SS,
ETC.
JET PUMP
506537SS
506538SS
506541SS
Factory set voltage 115 V
Connecting volatge changing :
Before changing the voltage connection :
A) Ensure the power to the pump is disconnected.
B) Open motor junction box cover.
C) Please select the up knob position for 115 V
or down knob position for 230 V.
D) Connect to appropriate power source.
E) Close motor junction box.
2190 Dagenais Blvd. West
Laval (Quebec)
Canada
H7L 5X9
Tel. : 514.337.4415
Fax : 514.337.4029
info@burcam.com
see us at
www.burcam.com
