Increasing burglary protection
Please take care your pin and administrator codes do not fall into the
wrong hands. Therefore, please store your codes in a safe location so that
these can only be accessed by authorised persons. In the event you lose a
code, the pin code must be changed at the earliest opportunity.
•
The factory code must be changed as soon as the lock is commissioned.
•
Codes that are easy to guess (e.g. 1, -2, -3, -4, -5, -6) must not be used.
•
Personal data (e.g. birthdays) or other data that may be guessed with
knowledge of the code owner must not be used as a pin code.
•
After changing a code, try the new pin code several times with
the door open.
Attention:
All changes to the administrator code, the factory set code and
the user code must be carried out with the safe door open!
After the locking system has been changed to a new code, it must be
tried several times with the door is open to ensure it works.
BURG-WÄCHTER UK
Input options
Number keys:
The numbers “1” – “0” are used for input
e.g. when entering the code.
“Func” key:
The “Func” key adapts its function to the
situation. You change to the previous menu
level by pressing the key or you delete
an entered character and you can also go back to the main menu.
The display will show the current function of the key.
“On/Enter” key:
The “On/Enter” button starts the system or selects the current menu item.
Keys “1” and “2”:
If there are several options, you can scroll up and down using these keys.
The display shows this function is available with corresponding arrows.
Fingerprint sensor:
Fingerprints can be stored via the fingerprint sensor or used to
open the safe
3
Summary of Contents for SecuTronic TRSE 12H
Page 23: ...Notes BURG WÄCHTER UK 22 ...
