BURG-WACHTER Tresor TRSE 6000 FS, User Manual

TSE BUSINESS 5000

English 

|

10 

2.4 Detailed description of selected basic functions

1. Opening the safe using the factory code

–  Press the 

On / Enter

 key

–   The 

Code / Fingerp

 indication is displayed (in case you possess electronics 

without fingerscan, Code is displayed instead.)

–   At this point you are asked to enter the Admin.  

Code (factory setting 

123456

)

–  The instruction 

Please turn knob

 is displayed

Attention:

 The message Please turn knob implies the action with the knob 

of the locking unit, for which the opening code has been entered.

2. Changing the Administrator Code

–   Press the 

On / Enter 

key

–   The indication of 

Code / Fingerp 

is displayed

–  Press the 

Function 

key

–   The 

Change code

 menu is displayed

–   Press the 

On / Enter

 key

–   The indication of 

Administrator

 is displayed

–   Press the 

On / Enter

 key

–   The indication of the 

Old code 

is displayed

–   At this point you are asked to enter the Admin.  

Code (factory setting 

123456

)

–   Press the 

On / Enter

 key

–   The indication of the 

New code 

is displayed

–   Enter the new code
–   Press the 

On / Enter

 key

–   The indication of Repeat code is displayed
–   Enter the new code
–   Press the 

On / Enter

 key

–  The indication of 

Code successfully changed

 is displayed

3. Creating a user with a code

–   Press the 

On / Enter 

key

–   The indication of 

Code / Fingerp 

is displayed

–  Press the 

Function

 key

–   The 

Change code

 menu is displayed

–   By pressing the key 2 reach the 

Administrator

 menu

–   Press the 

On / Enter 

key

–   Admin setup 

Create user

 is displayed

–   Press the 

On / Enter 

key

– 

 Create code

 is displayed

–   Press the 

On / Enter 

key

–   At this point you are asked to enter the Admin.  

Code (factory setting 

123456

)

–   The indication of 

User 00x

 is displayed

–   Please enter the user code and confirm it with 

ENTER

–  Press the 

On / Enter 

key 

–  FS combination to be confirmed with 

ENTER 

is displayed

1

–  Press the 

On / Enter 

key and accordingly the 

Function key

–   After confirmation, 

Save with the On key

 is displayed.

4. Creating a user with an E-Key

–   Press the 

On / Enter 

key

–  The indication of 

Code / Fingerp

 is displayed

–  Press the 

Function 

key

–  The 

Change code

 menu is displayed

–   By pressing the key 

2

 reach the 

Administrator

 menu

–  Press the 

On / Enter 

key

– 

 Admin setup Create user

 is displayed

–  Press the 

On / Enter 

key

– 

 Create E-Key

 is displayed

–   Press the 

On / Enter 

key

–   At this point you are asked to enter the admin.  

Code (factory setting 

123456

)

–  FS combination to be confirmed with 

ENTER

 is displayed

1

–   Press the On / Enter key and accordingly the Function key
–   User 

00x Store

 E-Key using 

ENTER

 is displayed

–   Please bring the E-Key in the programming mode.
–   Press the 

On / Enter

 key

– 

E-Key in Prog mode

, continue with 

Enter

 is displayed

–   Press the 

On / Enter 

key

–   After confirmation, 

Save with the On key

 is displayed

1

If the message FS combination to be confirmed with ENTER is  

displayed you have to decide whether the user should get the full  
opening right or half of it.
Full opening right: press Function key
Half opening right: press ENTER key
If you create a half opening right the Pin code is only to be allowed 
to open with another opening secret e. g. the fingerprint.