14
I Deutsch
ENTRY Home 5001 PIN
Schieben Sie den Zylinder von der
Innenseite der Tür aus in das Einsteck-
schloss der Tür (Abb. 101).
Schrauben Sie den Zylinder in der
Tür fest und schieben Sie Innen- und
Außenknauf bis an die Tür heran
(Abb. 102).
Schrauben Sie die Sechskant-
schrauben wieder in die beiden
Knäufe (Abb. 103).
ACHTUNG:
Achten Sie dabei darauf,
dass der Knauf mindestens einen
Millimeter Abstand zur Tür hat.
Sofern noch nicht geschehen,
entfernen Sie den Batterie-
schutzstreifen aus dem Batterie-
fach am Innenknauf (Abb. 104).
5
6
7
4
!
Montage des secuENTRY 5000 CYL
Im Folgendem wird Ihnen der Einbau
des secuENTRY 5000 CYL erklärt. Bitte
lesen Sie vor der Montage die Montage-
anleitung sorgfältig durch.
Entfernen Sie den vorhandenen
Türschloss-Zylinder, indem Sie die
Stulpschraube in der Tür lösen und den
Zylinder mit eingestecktem Schlüssel
herausziehen (Abb. 98).
Entfernen Sie die beiden Sechskant-
schrauben in den beiden Knäufen mit
dem beiliegenden Sechskantschlüssel
(Abb. 99).
Ziehen Sie den Knauf der Außenseite
komplett ab und den der Innenseite
soweit wie möglich nach hinten
(Abb. 100).
Tipp:
Der Knauf auf der Innenseite ist
größer als der Knauf der Außenseite.
Achtung:
Der Knauf auf der Innenseite
ist nicht abzuziehen. Versuchen Sie
nicht, ihn mit Gewalt zu lösen.
2 mm
4x
1.
2.
!
OUTDOOR
INDOOR
3
2
1
!
!
Abb. 98
Abb. 99
Abb. 100
Abb. 101
min. 1 mm
2 mm
min. 1 mm
Abb.102
Abb. 103
Abb. 104