Burg Wächter KEY SAFE 60 L, Operation Instructions Manual

4 

I English

KeySafe 60 L

Resetting your KEY SAFE 60 L combination

Locking your KEY SAFE 60 L

Installing & Replacing Battery

1.  Your KEY SAFE is factory preset to „0‐0‐0‐0.“
2.  Open the lockbox door.
3.  Remove the rubber plug and slide the silver 

reset lever, located on the inside of the KEY 
SAFE door, and slide it in the direction the 
arrow is pointing.

 Note: 

The reset lever can only be moved when the dials are set at the current 

combination. Select the new desired combination on the dials, keeping the door 
open. Hold fingers on the reset lever to avoid it from coming out of position when 
setting the combination.

4.  Check the operation of the KEY SAFE using the new combination.
5.  Slide the reset lever back to original position and replace the rubber plug.

1.  Insert keys into the KEY SAFE key storage area.
2.  Close the key storage area.
3.  Move the dials to an alternate setting.

1.  Open the KEY SAFE.
2.  Remove the cover of the battery 

compartment.

3.  Install new battery (1x CR 2032).
4.  Put the battery compartment cover 

back in position.

5.  Press the button to illuminate 

the light for 10 seconds.

Please read all instructions thoroughly before resetting the combination!

 Operating instructions