3
I Englsih
secuENTRY HOME 5000 CYL
Fig. 5
Fig. 4
Fig. 7
Fig. 8
Fig. 6
To setup the
ENTRY 7711 Keypad PIN
,
you must first download the secuENTRY
KeyApp. This can be found in the App
Store and Google Play Store (Fig. 4).
Once you have successfully registered,
you can start setting up the
ENTRY
7711 Keypad PIN
. Open the main menu
(Fig. 5).
Tap on the menu item
"
secuENTRY setup
" (Fig. 6).
In the following menu, tap on "
Device
Setup"
(Fig. 7). From here you can add
and setup secuENTRY units to the app.
Use the selection menu displayed and
tap on
"secuENTRY KeyPad"
to setup
your secuENTRY keypad (Fig. 8).
A list of any keypads that have already
been registered is displayed.
Add a new keypad by tapping on the
"+" in the top right-hand corner (Fig. 9).
secuENTRY
KeyApp
1
2
3
5
4
6
Fig. 9
ENTRY 7711 Keypad PIN commissioning
Fig. 10
Fig. 12
Fig. 14
Fig. 11
Fig. 13
A prompt will appear asking you to
scan the QR code provided using your
smartphone camera. The QR code is on
the sticker enclosed in the packaging
(see small fig.).
Tap on "
SCAN QR-CODE
" (Fig. 10). You
may be asked to confirm the app's
access to the camera. The camera's
picture window will then open (Fig. 11).
Scan the QR code.
A message appears containing data
about your keypad, confirm this with
"
OK
" at the bottom right (Fig. 12).
The following window gives you the
option of assigning a name to the
keypad. If you have several keypads in
use, it is recommended that you name
the keypad in such a way that you can
directly recognise where the keypad is
located or attached. Confirm the name
with "
OK
" (Fig. 13).
Your
ENTRY 7711 Keypad PIN
is now fully
setup. It will now appear in the list of
setup keypads (Fig. 14).
7
8
9
10
11
P
I
II
QR
