Burg Wächter secuENTRY 7711, Operating Instructions Manual

5 

I Englsih

secuENTRY HOME 5000 CYL

Opening the secuENTRY cylinder using the keypad

Activate the keypad by pressing either 

the ON key or the CLOSE key (I) (Fig. 28).
Provided that the connected 

secuENTRY cylinder supports the 

function, an entry 

"Opened"

 (ON button) 

or 

"Closed"

 (CLOSE button) is generated 

in the history. This allows for the 

"Open" and "Close" operations to be 

differentiated in the history.

Note: 

For further details on the 

history function, please refer to the 

master operating instructions for the 

respective cylinder.
Type in your 6-digit administrator code 

or user code (II) (Fig. 28). 

Note: 

For further details on the subjects 

of administrator and user codes, please 

refer to the master operating instruc-

tions for the respective cylinder.

When the number combination entered 

is correct, the cylinder status symbol  

(   ) will illuminate and the door can 

be unlocked (Fig. 29) or locked (Fig. 30).

Note:

 Depending on the door stop, the 

direction of rotation may be reversed. 

1

2

I

II

I

Fig. 28

!

!

3

3

!

Fig. 30

Fig. 29

QR

ENTRY 7711 Keypad PIN installation

ENTRY 7711 Keypad PIN installation - function test prior to installation

The installation of the 

ENTRY 7711 Keypad PIN

 is explained below. 

There are two options to choose from for installation. The 

ENTRY 7711 Keypad PIN 

wall bracket 

can either be 

screwed

 or 

adhered 

directly to the wall. 

Prior to installation, please read the installation instructions carefully.

!

1

2

ATTENTION: 

The distance between the cylinder and 

the keypad can be up to a maximum 

of four metres. This distance may 

vary, however, depending on external 

conditions. In order to ensure that 

the keypad functions correctly in the 

desired position, we recommend 

testing it first 

before installation.

Place the keypad in the desired 

installation location (Fig. 31).

Enter your administrator or user code 

and check that the cylinder is activated 

(Fig. 32).

Note: 

The administrator code, if you 

haven't already changed it, can be 

found on the sticker enclosed with 

the secuENTRY cylinder (Fig. 33). The 

master operating instructions for your 

secuENTRY cylinder describe how to 

create a user code.

If the cylinder activates, the signal 

strength is sufficient and the keypad 

can be installed in the desired location. 

If not, try again with a shorter distance 

between cylinder and keypad.

Fig. 33: 

QR code sticker for 

secuENTRY cylinder  

Factory-assigned 

administrator code 

max. 4 m

!

Fig. 31

Fig. 32