B-Smart-Lock Keypad II | August 2018
01 - AN/ DSW | English |4
Configuration
1. Mode selection
First, decide whether you want to use Fixed assigned PIN mode
or Freely selectable PIN mode.
a)
Fixed assigned PIN mode
Enter master code
√√ 1 master code √
select mode
√√ 5 0 √
b)
Freely selectable PIN mode
Enter master code
√√ 1 master code √
select mode
√√ 5 1 √
2. Setting the PIN length
Set the PIN length. The PIN length is 4 digits under factory
settings.
Enter master code
√√ 1 master code √
Specified the required
number of digits
√√ 0 x √
(x = 4 or x = 6)
Caution: If the number of digits is changed, all PINs currently
stored are deleted.
3. Functions settings for the selected mode
Now adjust any of the functions assigned to your chosen
mode that you need.
a)
Configuration in Fixed assigned PIN mode
Assigning the PIN
Enter master code
√√ 1 master code √
Assign PIN
√√ 3 xxxx (xx) √
Up to 50 PINs can be stored.
Delete PIN
Enter master code
√√ 1 master code √
Delete PIN
√√ 9 xxxx (xx) √
b)
Configuration in Freely selectable PIN mode
Activate/ deactivate the code reenter
Enter master code
√√ 1 master code √
Activate
Deactivate
√√ 2 1 √
√√ 2 0 √
4. General function settings
You can then set the general functions according tp your
requirements, regardless of the selected mode.
Set your own master code
Enter the old master code
√√ 1 master code √
Enter the new master code √√ 7 xxx xxx √
The master code must be 6 digits long.
Activate/ Deactivate LED-locking status indicator
Enter master code
√√ 1 master code √
Activate
Deactivate
√√ 8 1 √
√√ 8 0 √
Set right or left usage
Enter master code
√√ 1 master code √
Set locking direction
√√ x √
left: x= 4
right: x=6
Operation
a)
in Fixed assigned PIN mode
Lock
√ (hold down)
Unlock
enter code
b)
in Freely selectable PIN mode
Lock
enter code √√
Unlock
enter code
