sPinLock 420 | 07-2021
Rev. 01 | English | 4
Configuration
4. Maintain position and set new code via the
number wheels.
Important: Turn the number wheels from top to bottom,
starting with the left number wheel.
2
Set the code with master key
1. Move the lock to the horizontal position and set the
valid code (factory setting 0-0-0-0).
2. Insert the master key into the cylinder opening.
3. Turn the cylinder 90° to the left (counterclockwise). The
master key remains in the cylinder.
End position of the
cylinder: 12 o‘clock.
5. Turn cylinder 180° to the right (clockwise).
6. Turn the cylinder 90° to the left (counterclockwise)
to bring it to the starting position.
7. Pull off the master key.
End position of the cylinder:
3 o‘clock.
90°L
180°R
1.
2.
90°L
1. 2. 3. 4.
4. Maintain position and set new code via the
number wheels.
Important: Turn the number wheels from top to bottom,
starting with the left number wheel.
1
Set the code
1. Move the lock to the horizontal position and set
valid code (factory setting 0-0-0-0).
2. Insert the 2-cent coin into the cylinder opening.
3. Turn the cylinder 90° to the left (counterclockwise).
End position of the cylinder: 12 o‘clock.
5. Turn the cylinder 90° to the right (clockwise)
to bring it to the starting position.
End position of the cylinder: 3 o‘clock.
2
EURO
C
ENT
90°L
2
EURO
C
ENT
90°R
1. 2. 3. 4.
Mounting hole dimensions
16 mm
19 mm
3
Code finding and master key opening
1. Insert the master key into the cylinder opening.
2. Turn the cylinder 90° to the right (clockwise). The
master key remains in the cylinder.
End position of the
cylinder: 12 o‘clock.
90° R