sPinLock 420 | 07-2021
Rev. 01 | English | 5
Image rights: cover image, metal structur
e, BURG F
.W
. Lüling KG
Contact
BURG F. W. Lüling KG
Volmarsteiner Str. 52
58089 Hagen (Germany)
Fon + 49 (0) 23 35 / 63 08-0
info@burg.de
www.burg.de
2
Lock
1. Move the lock to the horizontal position.
2. Twist number wheels.
Note: When the lock is closed, the release button can
no longer be pressed. The lock housing can still be
turned freely.
Setting of the locking direction
The direction screw is used to set whether the door is locked to
the right (for left-hinged doors) or to the left (for right-hinged
doors).
1. Apply the flat-blade screwdriver to the latch adjustment
screw on the back of the door.
2. Carefully turn the screw 180 ° to the desired position
(according to the illustration) without exerting too much
force. The arrow points to the closing direction.
sPinLock 420
90° R
2
EURO
C
ENT
90° R
90° L
90°L
1. 2. 3. 4.
1.
2.
2
EURO
C
ENT
90°R
L
R
Operation
1
Unlock
1. Set the valid code using the number wheels.
2. Turn the housing until it engages.
3. Press the release button.
4. Keep the knob pressed, turn the lock 90 ° to the
right (clockwise).
Note: if the direction screw on the back of the lock
is set to „L“, the lock must be turned 90 ° to the
left (counterclockwise).
90° R
1.
2.
3. Hold the position and turn the number wheels one
after the other down until they engage clearly.
Start with the left number wheel.
4. Read the code. The lock is unlocked. Turn the master
key back (end position 3 o‘clock) and pull it out.
1. 2. 3. 4.