8
6
sTarT-up
Warning!
Risk of injury from improper operation!
▶
Only trained and qualified personnel may start up the device or
system.
The following base settings can be made on the display of the device:
•
Set IP address
Fieldbus versions: set PROFIBUS address or CC-Link address
•
Select protocol (not with PROFIBUS version and CC-Link address)
The description for configuration and parameterization of the
Typ ME43 can be found in the operating instructions.
The “Bürkert Communicator” PC software and the büS stick, which is
available as an accessory, are required for configuration.
The “Bürkert Communicator” software and a general description of it are
available on the Bürkert homepage.
7
opEraTion and funcTion
Warning!
▶
Only adequately trained personnel may operate the system or
device.
Operation using the display is achieved by means of the two arrow keys
and the round menu key.
Opening the main menu:
→
Press the menu key twice.
First the start screen appears, then the main menus with the
detailed views
Parameter
,
Diagnostics
and
Maintenance
.
Returning from a menu:
→
Using the arrow keys, select
Exit
or
Abort
or
Save
and confirm
using the menu key .
7.3.1
Description of the keys
Element
Description
Arrow
keys
Page down through menu
Decrease numerical values
Menu key Open main menu
Confirm selection, confirm input.
Tab. 2:
Description of the keys
english
