6
Basicsafetyinformation
Type 8228
3
bAsic sAfeTy informATion
This safety information does not take into account any contingencies
or occurrences that may arise during installation, use and mainte-
nance of the device.
The operating company is responsible for the respect of the local
safety regulations including staff safety.
risk of injury due to electrical voltage.
▶
Shut down the electrical power for all the conductors and iso-
late it before carrying out work on the system.
▶
If a 12...36 V DC powered version is installed either in a wet
environment or outdoors, all the electrical voltages must be of
max. 35 V DC.
▶
All equipment connected to the device shall be double insu-
lated with respect to the mains according to the standard
IEC 61010-1:2010.
▶
Observe all applicable accident protection and safety regula-
tions for electrical equipment.
risk of injury due to high pressure in the installation.
▶
Stop the circulation of fluid, cut off the pressure and drain the
pipe before loosening the process connections.
risk of burns due to high fluid temperatures.
▶
Use safety gloves to handle the device.
▶
Stop the circulation of fluid and drain the pipe before loosening
the process connections.
risk of injury due to the nature of the fluid.
▶
Respect the prevailing regulations on accident prevention and
safety relating to the use of dangerous fluids.
various dangerous situations
To avoid injury take care:
▶
not to use the device for the measurement of the conductivity of
gases.
▶
not to use the device in explosive atmospheres.
▶
not to use the device in an environment incompatible with the
materials it is made of.
▶
not to use fluid that is incompatible with the materials the device
is made of.
▶
not to subject the device to mechanical loads.
▶
not to make any modifications to the device.
▶
to prevent any unintentional power supply switch-on.
▶
to carry out the installation and maintenance work by qualified
and skilled staff with the appropriate tools.
▶
to guarantee a defined or controlled restarting of the process,
after a power supply interruption.
▶
to observe the general technical rules when installing and using
the device.
English
Summary of Contents for 8228 ELEMENT
Page 32: ...www burkert com ...
