21
Technical data
6
TECHNICAL DATA
6.1
Conformity
In accordance with the EU Declaration of conformity, the positioner Type 8696 is compliant with the EU
Directives.
6.2
Standards
The applied standards, which verify conformity with the EU Directives, can be found on the EU-Type Exami
-
nation Certificate and / or the EU Declaration of Conformity.
6.3
Licenses
The product is approved for use in zone 2 and 22 in accordance with ATEX directive 2014/34/EU category
3GD.
Observe instructions on operation in an explosion-risk (Ex) area.
Observe the ATEX additional instructions.
The product is cULus approved. Instructions for use in the UL area see chapter “6.9 Electrical data”.
6.4
Operating conditions
WARNING!
Solar radiation and temperature fluctuations may cause malfunctions or leaks.
▶
If the device is used outdoors, do not expose it unprotected to the weather conditions.
▶
Ensure that the permitted ambient temperature does not exceed the maximum value or drop below the
minimum value.
Ambient temperature:
See type label
Degree of protection:
Evaluated by the manufacturer:
Evaluated by UL:
IP65 / IP67 according to EN 60529
9)
UL Type 4x Rating
9)
Operating altitude:
up to 2000 m above sea level
9)
Only if cables, plugs and sockets have been connected correctly and in compliance with the exhaust air concept, see
chapter “9 Pneumatic installation”.
english
Type 8696, REV.2
Summary of Contents for 8696
Page 74: ...74 english Type 8696 REV 2...
Page 75: ...www burkert com...
