11
9
TransPorT
note!
Transport damages!
Inadequately protected equipment may be damaged during transport.
• During transportation protect the device against wet and dirt in
shock-resistant packaging.
• Avoid exceeding or dropping below the allowable storage
temperature.
10 sToraGe
note!
Incorrect storage may damage the device.
• Store the device in a dry and dust-free location!
• Storage temperature. -40 - + 55 °C.
10.1 decommissioning
Switch off the Control Electronics Type 8605 as follows:
→
Depressurize the system.
→
Switch off the power supply.
→
Remove the Control Electronics.
→
Keep the control electronics in the original packaging or in some
other suitable packaging.
10.2 restarting
Switch on the Control Electronics Type 8605 again as follows:
→
Unpack the Control Electronics and allow it to reach room temperature
before switching on again.
→
Then proceed as described in chapter “7 Installation”.
11 disPosal
note!
Damage to the environment caused by device components con-
taminated with media.
• Dispose of the device and packaging in an environmentally friendly
manner.
• Observe applicable regulations on disposal and the environment.
english
