2.16 Click On “Device Config”
Select the sample rate and select preferred latency (See
Image 16
).
Note: Actual latency used between two endpoints is the larger of the two endpoint settings. If
using the
Dante Virtual Soundcard
(
DVS
), anything to or from
DVS
will have a 4ms latency in
and out. Using a
PCIe Card
is recommended to get down to 150μs.
2.17 Click On The Dropdown Menu
Select DEVICE CONFIG. for each
Dante
device including the
PCIe Card
.
Make sure the sample rate is matching on each device!
Note: Sample rate
MUST
be set for each unit, including the
PCIe Card
.
For more information on
Dante
, visit:
https://www.audinate.com/solutions/dante-overview
Image 16:
Shows
device configuration
for
BMB3
.
9
CHAPTER 2
