IN 737RU Eng French Sept 06
IMPORTANT SAFETY INSTRUCTIONS
1.
To disconnect heater, turn controls to off, then remove plug from outlet.
2.
A heater has hot and arcing or sparking parts inside. Do not use it in areas where gasoline, paint, or flammable liquids are used or stored.
3.
Use this heater only as described in this manual. Any other use not recommended by the manufacturer may cause fire, electric shock, or injury
to persons.
4.
Do not use this appliance on an extension lead.
IMPORTANT INSTRUCTIONS
When using electrical appliances, basic precautions should always be followed to reduce the risk of fire, electric shock and injury to persons. These
include the following:
Installation.
1.
Read all the instructions before using this heater.
2.
Do not locate this heater immediately below a socket outlet.
3.
Do not use this heater in the immediate surround of a bath, shower, or swimming pool. Do not allow any contact with water.
4.
Do not cover this heater. Do not locate near curtains etc, they could blow and cover the heater. Do not allow any flammable objects such as
chairs, tables etc to be placed within six feet of the heater. Do not allow anything to restrict the airflow around the heater, there could be a risk
of overheating.
5.
Do not lead the cable in front of the air outlet.
6.
Do not trap the cable. Ensure that the fire is not standing on the cable.
7.
Before use, the appliance must be securely fixed by the method described in the following pages. Until it has been fixed in place, do not leave
it in a location where it could be accidentally knocked over by children or pets etc.
8.
Do not permanently fix the appliance, it will need removing for servicing.
9.
Parts of this heater are hot when in use. To avoid burns, do not touch hot surfaces.
10.
Do not run the cable under a carpet or rug etc. Arrange cable away from traffic areas and where it will not be tripped over.
11.
This appliance must not be used by children or other persons without assistance or supervision if their physical, sensory or mental capabilities
prevent them from using it safely. Children must be supervised to ensure that they do not play with or touch the appliance. Use an approved
fixed fire screen or safety guard if there is any chance that the appliance could be inadvertently touched.
12.
Do not use outdoors.
13.
Do not operate any heater with a damaged cable or plug or after the heater malfunctions, or after it has been dropped or damaged in any man-
ner. Return the appliance to an authorised service agent for examination and repair.
14.
Do not insert or allow foreign objects to enter the appliance as this may cause electric shock, fire, or damage to the appliance.
15.
This is an imitation flame effect electric fire and must not be used as a real fire.
16.
Do not sit or put loads on top of the appliance.
17.
If moving, do not drag the appliance as this could cause damage. Lift the appliance (with help if required), move then lower.
18.
Risk of choking. The pebbles on the fire are real. Do not allow children or pets etc to eat the pebbles due to the risk of choking. Never leave
unsupervised.
19.
Switch off and unplug the appliance when not in use.
Commissioning your fire
/
surround
Carefully unpack your electric fire, it will consist of: Electric fire, one spacer already fixed to frame (537 only),
bag of pebbles, a log effect, a fixing kit and a remote handset.
Stone effect surround, surround fixing kit and a remote handset. ( 737 suite only)
This product also has the option of being hung from a wall using the cut out keys on the rear (
→
).
The product must be secured to a wall using appropriate wall plugs.
4. (737 Only)
The surround must now be secured to the wall with the fitting kit provided. A template for this, is marked out
on the outside of the cardboard box. Use this to locate and fix the brackets to the wall using the large screws and wall plugs
provided. The, lift the surround and hook the brackets on the back of the surround over the
brackets on the wall. This should be done by two adults.
5. (537only)
The appliance comes with one removable spacer.
If you would like
to use the electric fire freestanding, leave the spacer fixed to the rear of the front
trim. If you have a suitably sized fireplace opening the spacer can be removed to
allow insetting.
The trims have sharp edges. Always wear protective gloves, boots, goggles and clothing when carrying out any fitting or
servicing tasks on this appliance. Ensure all tools are in good repair. If in any doubt, seek assistance.
1. (537 Only)
There are two silver transit screws located at the rear of the appliance. These
must
be removed before in-
stallation. See picture right
2. (737 Only)
There are four transit bolts at the rear of the surround. These
must
be removed prior to securing the sur-
round to the wall.
3. (537 only)
Position the electric fire following the
installation
instructions above. For stability you must fix the fire into
position using the fixing kit, this is to ensure that the appliance will not fall forward. Using the wall plug, attach the eye-
bolt to the wall or back of the fireplace behind the fire. Screw the fixing screws and washers partway into the hole shown
in the diagram. Wrap one end of the wire half way around the left-hand screw and tighten so the wire is trapped between
the washer and the chassis. Now pass the other end of the wire through the eye bolt. Move the fire closer to the eyebolt .
It is not usually necessary to have the wire taut. Thread the wire through one of the two fixing holes in the other side of
the chassis, position the fire, then pull through the wire to take up the slack and thread the wire all the way back through
the other hole. Move the fire back to the required position and check it is secured by tipping the fire forwards so the wire
is supporting the weight. Give it a small tug to ensure that it is secured.
7.
Place the pebbles on the fibreglass fuel bed. If for any reason you need more pebbles, it is
quite acceptable to use normal pebbles. Alternatively, you may wish to fit the log effect instead.
6.
Fixing stainless steel sides: Remove the backing of the adhesive strips and press the stainless
steel sides firmly to the black trim on the fire. Ensure they are lined up. ONCE IN PLACE,
THEY CANNOT EASILY BE REMOVED.
Adhesive
strips
Right Side
Left Side
Save these instructions
