3
UNPACKING AND INSTALLATION
PLEASE NOTE: To protect its surface the 099 preamplifier is being shipped in a sturdy plastic bag. Please
keep children away from this plastic bag to avoid the danger of suffocation.
Unpacking
To avoid damaging the finish of the housing, do not use sharp or pointy tools to open the
packaging. Please make sure that the content of the box is complete. Should anything be
missing or if you notice any damage to the unit while unpacking it please do not install the
preamp. Immediately contact your authorized dealer.
Content of box
The box contains:
•
1 099 preamplifier in protective packaging
•
1 Power cable
•
4 Input adapters stereo jack to RCA
•
1 Remote control
•
1 Owner’s manual
Packing material
We recommend retaining the original packing material in case you need to transport the unit
in the future.
Setting up
If the operating temperature is too low as well as too high it may cause malfunction.
Therefore, we recommend letting the unit sit for a while after unpacking before
connecting it and turning it on.
Carefully remove the unit from the packaging and set it up in an appropriate location. To
protect the 099 from overheating make sure that the location offers sufficient ventilation.
Avoid direct sunlight as well as unusual amounts of dust and humidity. Make sure that the
location is sturdy enough to accommodate the weight of the equipment.
Slots and other openings in the housing are designed for ventilation and must not be
covered up by magazines, tablecloth, curtains and the like.
If the unit has to be operated in an extremely warm environment it may be necessary
to provide additional ventilation. Do not operate the unit in an extremely humid
environment such as a bathroom or some similar location.
