Burmester AMBIENCE 31, Operating Manual

operAting the LouDspeAkers

18

6 

Operating the Loudspeakers

NOTICE

Incorrect wiring or excessive sound levels

Incorrect wiring or excessive sound levels can damage the system components.

►

Before switching on the system, check all cable connections for correct polarity 
(positive, negative).

►

After re-wiring, slowly increase the volume until you are certain that everything is 
connected correctly.

note: 

All chassis in this speaker are burned in and selected as pairs using a digital measuring 
system. However, like all mechanical systems, the speakers need an initial burn-in 
period to develop their full acoustic potential.

6.1 

Improving your audio — ambience tweeter

At higher frequencies, loudspeakers emit an increasingly bundled sound field. On 
conventional loudspeaker systems, this results in very precise, yet sometimes restricted 
spatial reproduction.
To counteract this effect, the BA31 is equipped with an additional, back-firing tweeter. 
This ensures a broader stage, with more depth, which you can adjust according to your 
personal preferences using the continuous level control.

►

Adjust the level of the back-firing tweeter to suit your individual sound preferences. 
Ideally, a good balance is achieved between spaciousness and the precise 
reproduction of individual instruments and voices.

►

You can also vary the exact position of the speakers as well as the angle of the 
speakers to your listening space. 

7 

Maintenance, Repair, and Care

NOTICE

Damage to the speaker surface

Liquids and chemical agents can damage the housing surface.

►

Make sure that no liquids enter the loudspeaker.

►

Do not use chemical agents to clean the speaker.

8 

Disposal

Legislation prohibits the disposal of this device by means of normal household waste 
(residual waste, recycling, organic waste, paper, glass). The device must be handed 
over to a communal collection point or voluntary take-back system.