The Contractors Choice
thermOweld
®
ECN 2552 REV "K" 03/06/13 34-5381-84
+1 (918) 627-5210 • 1-800-558-1373 • WWW.THERMOWELD.COM
ELECTRICAL GROUNDING • CATHODIC PROTECTION • ELECTRIC UTILITY • RAIL
Tel. +1.800.558.1373
Tel. +1.918.627.5210
www.thermoweld.com
INSTRUCTIONS FOR THERMOWELD GROUNDING CONNECTIONS - CABLE TO BUS BAR
CB-36
Place cable into mold as shown with end even with top of
bar. Butt bar against cable. Follow welding instructions
on the back of this sheet.
CB-35
Place copper strip or bar into mold as shown and then
place cable into mold. Follow welding instructions on the
back of this sheet.
CB-34
Place copper strip into mold as shown. Insert cable to
center line of tap hole and close mold. Follow welding
instructions on the back of this sheet.
CB-30
Place cable and bar into mold as shown. Follow welding
instructions on the back of this sheet.
CB-16 / CB-17
Place bar and cable into mold as shown. Follow welding
instructions on the back of this sheet.
CB-8
Butt cable and bus bar together beneath tap hole as
shown.
CB-16
CB-17
