28
TECHNICAL PASSPORT. INSTALLATION and OPERATION MANUAL
TECHNICAL PASSPORT. INSTALLATION and OPERATION MANUAL
TECHNICAL PASSPORT. INSTALLATION and OPERATION MANUAL
TECHNICAL PASSPORT. INSTALLATION and OPERATION MANUAL
- Remove the cover of the inner boiler
body
(2)
using wrench
S13
.
- Clean the fan blade
(1)
and the dust and
soot deposits. Use a brush. If the fan is
not properly cleaned, this will affect the
boiler performance.
Diagram 16
- Check the nut holding the fan blade (
2
)
to be well tightened. Attention: the nut
is left threaded!
- Upon assembling the gasket of the
fan must fit well in place. If necessary,
change the fan gasket.
- Mount back the top cover
9.3.2. Cleaning and maintenance of the
cleaning system:
- Remove the top cover (9.3.1).
- Cleaning system (
1
). Clean the ash
deposits using a vacuum cleaner and/or
a brush.
Diagram 17
- Hold a visual inspection of the condition
of the entire cleaning system. Also check
the drive mechanism, located outside
the combustion chamber.
- Upon detection of worn piece/part, it is
recommended to have it replaced with a
new one.
- Dismantle flue pipes from the cleaning
system of the boiler and clean them
well. For this purpose: remove the upper
ring of the automatic cleaning system
(
2
). Use wrench
S10
. Use a brush to
clean the flue pipes thoroughly one by
one. Mount back the flue pipes and the
upper ring of the cleaning system.
- Check silicone gasket mounted on the
edge of the boiler. Replace if cracked or
hardened.
- Mount back the top cover.
- The ashes from the cleaning system
are collected in a drawer container
for ash and soot. Upon completion
of the cleaning procedure, empty the
container.
9.3.3. Servicing of the burner:
- Remove the burner casing from the
boiler cabinet body – using the handles
(1) lift it up then pull it towards yourself
(Diagram18).
Diagram 18
- Remove connector (
2
) housing the wire
connections between the burner and
the controller. Unscrew the 2 marked
plastic head bolts (1) to release the slide
rail onto which the burner is mounted.
