See our catalog at
www.burrking.com
contact us @
info@burrking.com
DOC 1000OP-99 06/07
1
BURR KING MFG. CO., INC.
1220 TAMARA LANE
WARSAW MO 65355
WWW.BURRKING.COM
(660) 438-8998
(800) 621-2748
FAX (660) 438-8991
June 2007
Operating instructions for the Model 1000 buffer
The Model 1000 buffer is a double spindle buffer. It is designed to use cotton, nylon,
flap, wire, and other buffing and/or de-burring wheels. Your Model 1000 may be fixed
speed (single or three phase), or variable speed single phase depending on the
configuration ordered. The Model 1000 has an integrated dust collection adapter that will
connect to a dust collection system with a recommended minimum capacity of 500
CFPM.
Stone, vitreous, or other type grinding wheels must not be used on the Model 1000. For
maximum effectiveness, and operator safety use wheels manufactured by well-respected
manufacturers.
•
Use wheels that are the proper size and type for your machine.
•
Do not use wheels that are old and/or excessively worn.
•
Do not operate the buffing wheel in a reverse rotation. The spindle must rotate
CCW when viewed from the right side (opposite of the motor).
•
Do not exceed the maximum recommended buffing wheel speed (see the
manufacture’s instructions), or the 2000 RPM spindle speed for which your
Model 1000 is designed to operate, which ever is less.
•
Do not use your Model 1000 with the factory-supplied guards removed, or
with the wheel guard door(s) open.
Prior to operating the Model 1000 please take time to do the following
:
1. Insure that you have received all of the items that you ordered. Compare the packing
slip with your purchase order, and of course with the physical items received.
2. Verify that there is no obvious shipping damage. If shipping damage is discovered
notify the freight carrier of your intention to file a freight damage claim; they will assist
you.
3. Verify that the AC power that is identified on the machine matches the AC power that
you intend to operate the machine. Do not modify the Model 1000 wiring or other
electrical controls without the advice of the factory or a competent electrician.
4. Do not modify or defeat any AC wiring safety feature. In example, do not remove the
grounding pin on the AC plug.
5. Read the Operator, and Operating Area Safety Instructions carefully. Insure that all
persons who will operate the Model 1000, or who will work in the vicinity of the Model
1000 read, understand, and comply with these instructions.
