17
Repair and Maintenance
WARNING:
Make sure power switch
is in OFF position before
performing any maintenance.
WARNING:
To avoid a pinch or injury,
keep fingers away from
moving sprockets and chain.
Note the sequence of the hardware for assembly
4. Install the new chain or wheel by slipping
the chain around the axle. Slide the axle with
hardware into the slots on the frame. Maneuver
the chain onto the sprocket on the rear wheel
and motor.
5. Tighten chain adjusters using 10mm wrench
evenly to remove some slack from the chain as
required.
TT250 - TT250R – TT350R
B-1 Rear Wheel Axle
B-2 Rear Axle Adjuster (2)
B-3 Mounting Plate-Brake
Caliper
B-4 Spacer (2)
B-5 Flat Washer
B-6 Lock Washer
B-7 Acorn Nut