6
Install the Rear Fender
Using (3) 6mm allen bolts, attach the Rear Fender to the top of the
Rear Fork just behind the rear shock. Tighten securely with a 5mm
allen wrench. Remember the fender is plastic so do not over
tighten bolts.
Checking the Tire Pressure
Both tires should be set to 40-45 P1SI. We strongly recommend
45 PSI for persons over 175 lb when riding this product.
Proper Tire pressure is VERY
IMPORTANT. Do not squeeze the tire
and assume it is correct. For the best performance and range this
must be checked regularly. Low tire pressure reduces range, speed
and all-around performance.
Please Note: There is a tire information label located on the left
side of the rear fork with this information as well.
Installing the Footrests
The footrests are made to fit on the right and left. MAKE SURE YOU
ATTACH THE FOOTRESTS SO THAT THEY FOLD TOWARD THE
BACK OF THE BIKE. Using (4) 10mm Hex bolts and lock nuts attach
the footrests and brackets to the bottom of the frame just below
the battery box. Using 14mm wrenches Tighten the bolts and nuts
securely.
