burster Italia s.r.l. ·
·
·
· Sede legale ed operativa ·
·
·
· Via Cesare Battisti, 16/18 · 24035 Curno (BG) · Tel. +39 035 618120 · Fax +39 035 618250
e-mail: info@burster.it · http://www.burster.it
C.F. e P.IVA 11048400151 · Capitale sociale Euro 49.920,00 ···· R.E.A. di Bergamo 276749
Apparecchi di misura di precisione. Sensori e Sistemi
per grandezze elettriche, termiche e meccaniche
Imprint
Valid for...
86-2113; 86-2413; 86-2493;
86-2153; 86-2453; 86-2494
and similar.
Reprint-Interdiction Reprint, even in extracts, only with written authorization.
Modification
Technical changes reserved.
References in this Text
1.6 Warning Notes; Page 5
Attention must be paid to the accident prevention regulations of the trade associations.
Coverings and casings are necessary before operating the sensor. This is also valid for
commissioning, maintenance and trouble shooting.
Duties of the coverings and casings are:
⇒
Protection from detaching parts
⇒
Protection from contusion and shear
⇒
Prevention from reaching rotating parts
⇒
Prevention from being tangled up and/or getting caught by parts
Coverings may
⇒
Not grind
⇒
Not rotate
Coverings are also necessary outside of operating and motion travel areas of persons.
These demands can be modified if other sufficient safety devices are available. During
operation, the safety precautions must be operative. By vibrations, damages can occur at
hand-guided devices which can lead to injuries.
4 Mechanical Assembly; Page 7
Caution: During the assembly inadmissibly large forces may not act on the sensor or the
couplings.
During the assembly the sensor must be supported to protect it from falling down.
4.1 Typical Application; Page 8
Caution: Do not use pulse or impact wrenches!!
6.1 Engaging; Page 10
Warming-up period of the torque sensor is approx. 5 min.
6.4.2 Natural Resonances; Page 11
An operation of the device in natural resonance can lead to permanent damages.
