Burton Safes Limited Brockholes Business Park, Rock Mill Road, Brockholes, Holmfirth HOB 7BN. t 01484 663 388 f 01484 666 338 enquiries@burtonsafes.co.uk www.burtonsafes.co.uk
• Press and hold Key [1] until double beep. The light
remains on during the following actions.
• Enter main code.
• Enter Secondary code twice (Double signal after each)
• • •
t-+1t1t
ADD SECOND USER
l2f
�-
- -
I'!'
,.,.,
·'a"
.........
II
=
©
j =Q
&••••••
........
II
=
©
j =Q
(The secondary code can be changed like the main
code. Starting by pressing 1 instead of
z
ero With the
main code, the secondary code can be deleted. The
main code cannot be deleted.)
• Press and hold Key [3] until double beep. (The LED remains on throughout the following action).
• Enter main code.
• The secondary code is now deleted.
............ II
=
©
(}UI
11
TO PROGRAM THE TIME DELAY (max
-
99minutes) & OPEN WINDOW (max - 19minutes):
• Press and hold [9] until double beep. (The LED remains on throughout the following actions).
•
Enter main code (double beep if valid).
• Enter desired time delay and opening window length - i.e. if you want to program 26 minutes time
delay and 12 minutes opening window, enter: "2612': (double beep once entered)
•
Enter the same time delay and opening window again to confirm (double beep if correct).
•
Turn the keypad 80 degrees clockwise until it stops turn the handle and pull door open.
•
Enter a valid six-digit code: i.e. 1 2 3 4 5 6 (factory code);
•
The LED flashes every 2 seconds when time delay begins.
•
When the opening window begins the lock will beep every 2 seconds.
•
Whilst the opening window is open input your user code.
•
I
n the event the opening window expires the opening process must be
repeated.
GIil
J-J
............
........ 11
........ 11
II
=
©
j =@
To change the loc
k
bac
k
to no time delay
-
in the opening window
(
after the time delay has counted down and the beeps occur
)
hold the 9
until double beep and light stays on
-
enter the valid main code
-
and enter
00
01
and
00
01 again to comfirm
.
This will now set the loc
k
bac
k
to default time settings
OPENING THE LOCK WHEN A TIME DELAY IS ACTIVE
A series of beeps indicates that the battery is weak and must be replaced. Only use 9V ALKALINE - batteries!
Burton Safes recommends...........
O
pening with the Time Delay
BS-Inst-023
Oct - 16
