USER INSTRUCTIONS
LOCKING:
• Turn the bar handle counter clockwise until stop position is reached
CURRENT SUPPLY
I
BATTERY CHANGE:
A series of beeps indicates that the battery is weak and must be replaced. Only use 9V ALKALINE - batteries!
Burton Safes recommends .......... .
.,
ALKALINE BATTERY
Press the catch on the top edge of the battery cover with a screwdriver and lever
off
the battery lid. Pull the battery
out carefully until the battery clip is visible. Release the battery from the clip and replace. Re-engage the lid. Please
ensure that the cable is not damaged.
Burton Safes Limited Brockholes Business Park, Rock Mill Road, Brockholes, Holmfirth HD9 7BN. t 01484 663 388 f 01484 666 338 enquiries@burtonsafes.co.uk www.burtonsafes.co.uk
EMERGENCY POWER SUPPLY:
If the safe has run out battery please follow these instructions
:
•
H
old a
9V
D
uracell battery to the front
+
&
-
connectors on the front of the safe as displayed
•
While keeping contact at all times with the
battery press "On" and enter your current code
then enter to access the safe
•
Once inside please follow the above instructions
on how to change your battery