USER INSTRUCTIONS - BURTON DUO LOCK
(SWING BOLT)
How to open the safe
ABOUT THE LOCK
This lock requires a 6-digit code to open the
lock. You can have 2 different codes on this lock,
the master code and the secondary code. This
lock can also have a time delay activated of 1-99
minutes and an open period of 1-19 minutes.
• Enter a valid 6-digit code (the factory default is ‘123456’)
• If the code has been entered correct the lock will beep twice
• Within 3 seconds turn the handle to the open position
• Open the safe door
Incorrect Entry
• If an incorrect code has been entered, it will be followed by a long beep
• After 4 incorrect entries, a penalty time of 5 minutes will begin. During
this time, no other code entries can be made
• When the penalty time is over enter a valid 6 digit code
NOTE: 2 more consecutive invalid codes will restart an additional 5 minutes penalty time
How to close the safe
• Ensure that the bolts are fully retracted (if necessary rotate the handle
clockwise to retract the bolts)
• Gently push the door shut. Always ensure that there are no objects or
people in the way of the closing door
• Turn the handle bar anti-clockwise until the stop position is reached
