11
• Press and hold key [1] until the lock beeps twice
• Enter the 6-digit MASTER code
• Now enter a 6-digit code for the SECONDARY code; the lock will
beep twice
• Enter the 6-digit code for the secondary code again to confirm. The
lock will beep twice and the code is set
Activating the secondary code
(using the master code)
Changing your code
• Unlock and open the safe door
• Press and hold key [0] until the lock beeps twice
• Enter the current 6-digit code of the user you wish to change (master
or secondary) the lock will beep twice
• Now enter the new 6-digit code, the lock will beep twice
• Enter the new 6-digit code again to confirm; the lock will beep twice.
The code has now been changed for that user
NOTE: if there are any code entry errors, they will be followed by a long beep. The old
code will remain valid and you can repeat the steps.
• Press and hold key [3] until the lock beeps twice
• Enter the 6-digit master code
• The secondary code is now deleted
Deleting the secondary code
(using the master code)
Programming the time delay and open window
A time delay is the time you have to wait in between the entry of your
code and the opening of your safe. An open window is the amount of
time you have to open your safe. For example, if you wanted a 30 minute
time delay and a 10 minute open window, this would mean that once you
have entered a valid 6-digit code, you have to wait 30 minutes before
you can open the safe door. After 30 minutes you will have 10 minutes to
open the safe door. If you wait longer than 10 minutes, you have to start
the process again.
