5
USER INSTRUCTIONS - PS310 LOCK
How to open the safe
ABOUT THE LOCK
This lock requires a 6-digit code to open the
lock. You can have a master code and up to 9
user codes. In order to activate the user codes,
you will need the master code. The master code
can’t be deleted but you can remove user codes.
The lock also features dual code opening and
time delay opening.
• Press the [ON] key
• Enter a valid 6-digit code (the factory default is ‘123456’)
• Press the [ENTER] key
• Within 4 seconds, turn the handle clockwise until the stop position is
reached
• Open the safe door
Incorrect Entry
• If an incorrect code has been entered, the red LED will flash
• After 3 incorrect entries, a penalty time of 1 minute will begin. During
this time no other code entries can be made
• When the penalty time is over press the [ON] key
• Enter a valid 6-digit code
NOTE: Everytime an incorrect entry code is entered continuously the penalty time is
extended for 2, 4, 8, up to the maximum of 16 minutes
How to close the safe
• Ensure that the bolts are fully retracted (if necessary rotate the handle
clockwise to retract the bolts)
• Gently push the door shut. Always ensure that there are no objects or
people in the way of the closing door
• Turn the handle anti-clockwise until the stop position is reached
