R
2
en
Thank you for your purchase of this Elcometer 270 Pinhole Detector. Welcome to Elcometer.
Elcometer are world leaders in the design, manufacture and supply of inspection equipment for coatings
and concrete. Our products cover all aspects of coating inspection, from development through application
to post application inspection.
Your Elcometer 270 Pinhole Detector is a world beating product. With the purchase of this product you now
have access to the worldwide service and support network of Elcometer. For more information visit our
website at www.elcometer.com
1 ABOUT YOUR GAUGE
The Elcometer 270 Pinhole Detector utilises the ‘wet sponge’ method of holiday detection. When the wand
sponge is passed over a pinhole, current flows from the detector through the moisture in the hole to the
substrate below and back to the detector via the signal return lead. This current flow triggers an audible
alarm and causes the alarm LED to flash.
The Elcometer 270 Pinhole Detector is capable of testing at three voltages; 9 V, 67.5 V and 90 V
(depending upon model).
El
com
et
er
27
0
67
.5
9
90
V
olt
s
270
Pinhole Detector
4 of 15
For more information
/ 1300 287 935
mail@burwell.com.au / www.burwell.com.au
