8
Installation of the telematic module
6. Connecting the Terminal box
The additional components of the telematic unit are connected to the
terminal box. The following connections are provided:
1 - Power supply
The power supply of the telematic unit is established via a 4-core cable.
Connect the black (clamp 31 – minus), the red (clamp 30 – steady plus)
and the blue cable (clamp 15 – ignition plus) to the power supply of
your radio (where required via the cigarette lighter or the fuse box).
After connection to its matching part, the yellow cable provides for ra-
dio muting during a phone conversation. Please connect the white Mo-
lex connector with connection 1.
Attention:
If you also connect the blue cable to clamp 30, the hands-
X
free car kit will be permanently supplied with power. If the
vehicle is not running for a longer period, this could lead to
the running down of the car battery.
Applications are only available for the two boxes between ports 1 and
2 subsequent to the further development of the software.
Summary of Contents for BF 1150
Page 52: ...51...
