Setup and function
Product manual 2CKA001473B8289
│
9
4
Setup and function
4.1
Functions
The temperature controller is used to control the temperature in closed rooms.
4.2
Features of function and equipment
Article no.
Features / Function
1094...
■
Opens when the set temperature is reached.
■
With separate connection for time-controlled reduction of night-time temperature (4
K).
■
Servo valves of "closed when de-energized" design are required for the controller.
1095...
■
Opens when the set temperature is reached.
■
With normally open contact (not applicable for 1095...).
■
With separate connection for time-controlled reduction of night-time temperature (4
K).
■
With installed sliding switch and control lamp for night-time temperature reduction (4
K).
■
Servo valves of "closed when de-energized" design are required for the controller.
...UF
■
With normally closed contact
■
With remote sensor (external temperature sensor for mounting in the floor) and
thermal feedback.
■
For electric floor heating.
■
Opening of the relay contact, when the set temperature is reached.
1096...
■
Opens when the set temperature is reached.
■
With separate connection for time-controlled reduction of night-time temperature (4
K).
■
With installed sliding switch and control lamp for night-time temperature reduction (4
K).
■
Servo valves of "closed when de-energized" design are required for the controller.
1097...
■
With switchover contact (heating / cooling).
■
Servo valves of "closed when de-energized" design are required for the controller.
...UTA
■
With display of actual temperature
– Temperature display in 0.5°C steps.
– Display accuracy: ±0.5°C for load currents of
≤
2 A.
– Display accuracy: ±1.5°C for load currents of >2 A.
■
Automatic controller calibration.
